Duraline's Rubber Molded
Portable Lighting Systems are Factory Mutual Tested and Approved, for
indoor / outdoor wet locations, exceed O.S.H.A requirements, and
are available with plugs suitable for IEC Class IP67and Nema 6
applications. These products are widely used in shipyard temporary
lighting, cruise ship string lighting, construction site temporary,
carnivals tent lighting, temporary lighting in buildings, task
lighting, tunnel construction, highway construction lighting, bridge
decorative and temporary lighting and mining industries for over 55
years.
These
Lighting
Systems provide safe overhead temporary lighting and easy to use task
lighting. All Duraline Lighting products are molded to heavy duty type
SOOW 600 volt cable in solid Hypalon (registered trademark DuPont Dow
Elastomers) chlorosulfonated polyethylene type 4085 rubber. Lamps are sealed by a
rubber "O" ring molded into each socket on all of Duraline's Lighting
Systems. This "O" ring forms a watertight seal around the neck of each
bulb eliminating problems associated with oil, dirt and moisture.
Lighting Streamers
are available in Vapor Proof and Non Vapor Proof and all come ready to
hang. Sockets come spaced at 10 ft intervals standard but almost any
spacing can be manufactured.
Vapor Proof Lighting also includes a
Pyrex Globe and guards are optionally available on all Lighting
products.
Lighting
Streamers
are available in 2, 3, 4 and 5 wire configurations to extend the
length of the light string without the need for booster transformers
and can accommodate 120 and 220 volt lamps
Duraline's lamp sockets have been tested to seal out water
per MIL-F-16377/39A,
MIL-F-16377G and
MIL-STD-108E (3' of water for 1 hour) if accidentally submerged. While
they have been tested and approved this practice is not recommended as hot lamps may burst
when contacting cold water creating a safety hazard. Use of lexan rain
guards, rough service coated lamps and
GFCI protection increase
overall system safety. Budget Miser sockets are not built to a Mil
Standard but have been tested to seal out water.
Duraline lighting
products are suitable for IEC Class IP67 and Nema 6 applications.
All lighting
products can use a 100 watt max incandescent (A21 Size Recommended)
lamp or 32 watt max fluorescent (130 watt equivalent) lamps now
available from Duraline.
Wet Location Rubber
Molded String lights with "T" Drops and
Vaporproof Hand Lamps with ON /
OFF switch. All drops are Molded to heavy duty type SOOW cable rated
600 Volts. Streamers include a 25' lead with a molded male nema 5-15
plug. "T" Drops are spaced 10' apart and include an 18" drop with a
solid rubber molded wet location Vaporproof hand light with switch. Available with black cable / red hand lamp or yellow cable /
yellow hand lamp. String lights are either dead ended or include a 1
foot tail of cable with female nema 5-15 connector.
Hand Lights Rated 100
Watt Max Incandescent - Lamp Type A21 or 32 Watt Fluorescent
Great for Bridge Lighting, Tunnel Lighting, Construction Lighting,
Dress Ship Lighting, Tent Lighting, Indoor / Outdoor String Lights.
The
Vapor-Proof Streamer is similar to the
Vapor-Proof Block streamer
except it is designed for hanging rather than surface mounting. These
sockets include a heavy-duty, internal crush-proof ring around the
screw shell, an external grounding ring and a molded-in, heavy-duty
brass hanging grommet. The body style is designed to accommodate a
Vapor-Proof Pyrex globeand 75 Watt max incandescent or
32 Watt max fluorescent lamp. A heavy gauge steel wire guard is
finished with a Zinc-Chromate plating for protection against
corrosion. Socket
bodies are molded of durable Hypalon (registered trademark DuPont Dow Elastomers) chlorosulfonated polyethylene type 4085 rubber, and each socket is integrally
molded to type SOOW cable.
Suitable for use in indoor or outdoor wet locations. Available with
Optional Weather-Proof
GFCI protection and/or
On/Off Switch. Meets O.S.H.A and NEC Requirements.
Great for Bridge Lighting, Tunnel Lighting, Construction Lighting,
Dress Ship Lighting, Tent Lighting, Indoor / Outdoor String Lights.
These low voltage vapor proof handlamps operate at 12 volts and are
ideal when jobsite locations require an O.S.H.A compliant portable
lighting solutions for use in wet and possible conductive locations.
The lightweight transformer is housed in a small waterproof enclosure
molded to the cable with a removable cover for servicing. This
enclosure is molded of Hypalon (registered trademark DuPont Dow Elastomers) chlorosulfonated polyethylene type 4085 rubber to protect transformer for
environment. This hand lamp also features an encapsulated switch,
which is molded into the body of the hand-light and is completely
watertight. These
sockets include a heavy-duty, internal crush-proof ring around the
screw shell, an external grounding ring and a molded-in, heavy-duty
brass hanging grommet. The body style is designed to accommodate a
Vapor-Proof Pyrex globeand 75 Watt max 12 Volt incandescent lamp. A heavy gauge steel wire guard is
finished with a Zinc-Chromate plating for protection against
corrosion. Socket
bodies are molded of durable Hypalon (registered trademark DuPont Dow Elastomers) chlorosulfonated polyethylene type 4085 rubber, and each socket is integrally
molded to type SOOW cable. Makes a great indoor / outdoor work light
suitable for mine safety.
Duraline Low
Voltage products are highly reliable and provide safe lighting indoor,
outdoors, underground and in wet locations.
Vapor-Proof Hand lights are designed as portable task lights /
trouble lights and do not include brass hanging grommets. This hand lamp also features an encapsulated switch,
which is molded into the body of the hand-light and is completely
watertight. These
sockets include a heavy-duty, internal crush-proof ring around the
screw shell, an external grounding ring and a molded-in, heavy-duty
brass hanging grommet. The body style is designed to accommodate a
Vapor-Proof Pyrex globeand 75 Watt max incandescent or 32 Watt max fluorescent lamp. A heavy gauge steel wire guard is
finished with a Zinc-Chromate plating for protection against
corrosion. Socket
bodies are molded of durable Hypalon (registered trademark DuPont Dow Elastomers) chlorosulfonated polyethylene type 4085 rubber, and each socket is integrally
molded to type SOOW cable. Makes a great indoor / outdoor work
light.
Duraline products are highly reliable and provide safe lighting indoor,
outdoors, underground and in wet locations.
Vapor-Proof Hand lights
/ Hand Lamps are designed as portable task lights /
trouble lights and do not include brass hanging grommets. These sockets
include a heavy-duty, internal crush-proof ring around the screw shell
and an external grounding ring. The body style is designed to
accommodate a Vapor-Proof Pyrex globeand 75 Watt
max incandescent or 32 Watt max fluorescent lamp. A heavy gauge steel wire
guard is finished with a Zinc-Chromate plating for protection
against corrosion. Socket bodies are
molded of durable Hypalon (registered trademark DuPont Dow Elastomers) chlorosulfonated polyethylene type 4085 rubber, and each socket is integrally molded
to type SOOW cable. Makes a great indoor / outdoor work light.
Factory
Mutual Approved for use in indoor or outdoor wet locations and
Class I, Division 2 Group D Locations.
Meets O.S.H.A and NEC Requirements.
Vapor-Proof Block
Wet Location Streamers incorporate the same socket as Duraline’s
Heavy-Duty Streamer Lights. These sockets include a
heavy-duty, internal crush-proof ring around the screw shell and an
external grounding ring. The body style is designed to accommodate a
Vapor-Proof Pyrex globe and 75 Watt max incandescent or
32 Watt max fluorescent lamp. A heavy gauge steel wire guard is finished with a
Zinc-Chromate plating for protection against corrosion. An
integrally molded flange with four mounting holes is also provided to
allow surface mounting of each socket. The assembly is molded of
durable Hypalon (registered trademark DuPont Dow Elastomers) chlorosulfonated polyethylene type 4085 rubber, and each socket is integrally molded to type
SOOW cable.
Suitable for use in indoor or outdoor wet locations. Available with
Optional Weather-Proof
GFCI protection and/or
On/Off Switch. Meets O.S.H.A and NEC Requirements.
Great for Bridge Lighting, Tunnel Lighting, Construction Lighting,
Dress Ship Lighting, Tent Lighting, Indoor / Outdoor String Lights.
Mounts on a wall, ceiling, concrete barrier, road divider ect.
M182700 Connector Maintenance Kit
This kit includes all the materials need to maintain all Duraline
connectors as well as our Lighting products.